Slot Cars Adelaide

Lincoln Park 4 Lane

Removing Steps on Joints

« Back to Album Photo 29 of 35 Previous | Next
Removing Steps on Joints
On testing the track the slight difference in Hieght at the joints proved a problem on some lanes. I used the corner of a steel rule to locate any steps from both directions of travel. I used a body filler file to level the joint while rechecking with the steel rule corner. I used the small triangle sander to finish of. Care must be taken not to damage the braid . The process took about a half hour on each of the joints needing correction. Once complete I masked the braid and gave the repaired area it a coat of water mixed Cabothane. Then 2 coats of Ferrodor . Finally coated with oil mixed flat Cabothane.
Posted on August 15, 2011 Full Size|

Post a Comment


Oops, you forgot something.


The words you entered did not match the given text. Please try again.

Already a member? Sign In