Slot Cars Adelaide

Lincoln Park 4 Lane

Track Slip Joint 1

« Back to Album Photo 19 of 35 Previous | Next
Track Slip Joint 1
The joint is 2 fingers and 2 slots on each section end.a piece of 9mm ply 200mm wide was drilled with 1/16 holes using a jig. these holes were then linked with a scribe line and that was highlighted with a red paint felt pen. A jig saw was used to cut the ply . The fingers & slot were produced so that one half is attached to each of the track sections being joined. 2 X 100mm ply plates are then screwed over the first ply with the fingers to finish the slots.
Posted on July 20, 2011 Full Size| Slideshow

Post a Comment

Oops!

Oops, you forgot something.

Oops!

The words you entered did not match the given text. Please try again.

Already a member? Sign In

2 Comments

Reply onesies for teens
12:22 AM on August 1, 2018 
Can I simply just say what a comfort to discover someone who truly knows what they're discussing online. You actually realize how to bring a problem to light and make it important. More people should look at this and understand this side of the story. It's surprising you're not more popular because you surely possess the gift.
onesies for teens https://brandengallon.yolasite.com/
Reply madden 19 cover athlete
6:07 PM on July 11, 2018 
This is a good tip especially to those fresh to the blogosphere. Brief but very precise information? Thanks for sharing this one. A must read post!
madden 19 cover athlete https://rodneymalachi.page4.me/52.html