Slot Cars Adelaide

Lincoln Park 4 Lane

Pivots for Routing Corners

« Back to Album Photo 9 of 35 Previous | Next
Pivots for Routing Corners
This corner has 2/30 for 60 deg. then 3/30 for 30 deg. so the two pivots are shown. Red pivot for the 2/30 curve and silver alloy for the 3/30 curve. The Miles Craft router circle cutting kit was too short for these radius so a board was fitted to the strait cutting guide with the mounting plate inverted. There is 2 holes in the board for the different radius. The 1/60 corners can be routed with the standard arm.
Posted on June 18, 2011 Full Size|

Post a Comment


Oops, you forgot something.


The words you entered did not match the given text. Please try again.

Already a member? Sign In


Reply mink lashes extensions
6:06 PM on July 11, 2018 
I like it whenever people get together and share views. Great blog, stick with it!
mink lashes extensions
Reply pikachu onesie kid
6:06 PM on July 11, 2018 
you are in reality a good webmaster. The site loading speed is amazing. It seems that you're doing any distinctive trick. Also, The contents are masterpiece. you've done a great task on this topic!
pikachu onesie kid